Нажмите на изображение, чтобы посмотреть в полный размер
Description
The ppr pipe end cap is a kind of mechanical fastener, the plug blocks the unnecessary ports in the pipeline and plays a role of sealing. Install a few rounds of PTFE tape or waterproof tape on the PPR pipe where the plug is installed, and use a wrench to screw the ppr end cap.
Function
The PPR Pipe End Cap is used to protect the end of the pipe from damage during the transportation process, and to block the pipe, and used to seal the reserved pipe.
Pressure Test
After connecting the PPR Pipe End Cap if there is water leakage, if the plug of the PPR pipe is threaded, you can remove more sealing tape or PTFE tape. If it is welded, it needs to be processed again. After the connection is made, the pressure test must be verified for 24 hours. Basically keep the pressure unchanged.
Tips
The connection of pipes and fittings in PPR piping system is connected by hot-melt sockets. It is realized by means of a special hot-melting tool that melts and inserts the pipe fittings and the inner and outer surfaces of the pipe at the same time under the specified temperature and time conditions. The two parts form a uniformly sealed whole as they cool. This kind of connection has good sealing performance, high reliability, and prevents leakage.
http://ru.ifanplast.com/